IntelliTouch® 2701 Series Controller (single touch)
Overview
The Elo Touch Solutions IntelliTouch controllers are designed to work specifically with IntelliTouch SAW touchscreens. Building technology with coordinating components enables a much smoother design and user experience.
![]() |
Works two waysThe 2701 series controller is a single touch unit that works through serial interface or via USB. It is a full-speed, self-powered, USB device. By default, the controller communicates over a RS-232 serial link. If, however, a USB cable is connected, the controller switches to an exclusively USB communicating mode. |
Fully OptimizedElo’s IntelliTouch controllers are designed and manufactured to work specifically with IntelliTouch SAW touchscreens for optimal performance. The controller maintains a no-touch reference signal. This reference signal is continuously updated to adapt to electronic drift and effects of contamination such as dirt and scratches. The live signal is compared to the reference signal to detect touches. |
![]() |
Specifications
-
Technical
Part Number(s)
D68054-000
Technology
SAW (IntelliTouch® Surface Acoustic Wave)
Number of Touches
Single Touch
Input Methods
Finger
Gloved hand
Passive stylusDimensions
83.8 mm x 53.3 mm x 12.2 mm
Surface Treatment
Clear
Resolution
4096 x 4096
Touch Activation Force
2 to 3 ounces (55 to 85 grams) typical
Input Voltage
+5 VDC, nominal (+4.75 to +5.25 VDC)
Report Rate
90pps
Baud Rate
for RS232 Interface: 9600 (default) and 19200
Current - Operating Mode
75mA, maximum at +5 VDC. Typical power dissipation is 300mW at 5V.
Operating Temperature
0°C to 60°C
Storage Temperature
-25°C to 85°C
Humidity
10% to 90% RH (Non Condensing)
Controller Cables
Serial cable: P/N D16890-000
USB cable: P/N D38640-000
Dual serial/USB cable: P/N D40022-000
Resources
(6)
-
Additional Support Resources
Download Drivers
-
Compliance
Agency Approval Certificates
-
Drawings
Dimensional Drawing
Dimensional Drawings - Cables
-
Specifications
Data Sheet
Product Family Specification