TouchPro® 8200 Series Controller
Overview
The Elo Touch Solutions 8200 series high-performance controllers are designed to work with Elo’s Projected Capacitive (PCAP) touchscreens. The 8200 series controllers are compatible with TouchPro® Pro-G and Pro-F screens from 7" to 22".
![]() |
Designed for simple integrationElo’s 8200-series controllers support up to 16 touches and are offered with a dual-use connector for both USB and I2C interfaces. They are full-speed, self-powered, USB devices with Elo designed and configured firmware. The Elo driver provides for ease of installation and setup across a variety of operating systems and architectures. |
Fully OptimizedThe 8200-series controllers are designed to provide a high-performance touch experience when paired with Elo’s TouchPro® PCAP touchscreens. With over 40 years of experience designing touchscreens, Elo has a team of engineers dedicated to optimizing screen design and controller tuning for each application. Utilizing industry leading control ICs our controllers combine the best of mutual and self-capacitance architecture for enhanced liquid resistance and noise immunity. Options are available to support passive stylus with 1 mm tip, 6 mm thick glass, and the ability to pass 10 Volts rms conducted-susceptibility testing. |
![]() |
TouchPro Product Selection Table
![Screen Families Screen Families](https://www.elotouch.com/media/wysiwyg/TouchPro/table_1text.png)
Screen Families
7"- 32"
7"- 22"
≥ 42"
7"- 32
7"- 22"
≥42"
![Controller Families Controller Families](https://www.elotouch.com/media/wysiwyg/TouchPro/table_2text.png)
Controller Families
Screen Size Range |
Form Factor* |
Flextail Configuration |
Interface | Touch Screen Family |
Controller IC Make/ Model |
Fluid Rejection |
Saline/ Salt Water Operation |
10V RMS CS |
Touch Through Glass |
Glove | Stylus | # of touches |
|
7200 series CoF |
≤15.6" | CoF | Single | USB | Pro-F | Multiple | Good | - | Yes | Good | Good | Passive | Multi |
8200 series Core |
7"- 22" | PCB | Single/Multi | USB/Serial | Pro-F/Pro-G | Multiple | Good | Good | Yes | Good | Good | Passive | Multi |
9200 series Advanced |
7"- 22" | PCB | Single/Multi | USB/Serial | Pro-F/Pro-G | Elo | Best | Best | Yes | Best | Best | Passive | Multi |
8300 series Large |
≥32" | PCB | Single/Multi | USB | Pro-M/Pro-F | Multiple | Good | - | Yes | Good | Good | Active | Multi |
9300 series Advanced |
22"- 32" | PCB | Single/Multi | USB/Serial | Pro-F | Elo | Best | Best | Yes | Best | Best | Passive | Multi |
Specifications
-
Technical
Technology
PCAP (TouchPro® Projected Capacitive)
Number of Touches
Multi Touch (16)
Input Methods
Finger
Gloved hand
Passive stylusDimensions
Elo’s 8200-series controllers have a variety of touch IC’s and form factors to choose from. Contact Elo for more details.
Surface Treatment
Clear
Interface
USB, I2C, Serial
Positional Accuracy
±1.5mm
Report Rate
≥ 100 Hz
Operating Environment
-20°C to 70°C; max 95% RH (non-condensing)
Controller Cables
Serial cable: P/N D16890-000
USB cable: P/N D38640-000
Dual serial/USB cable: P/N D40022-000Note
Exact specifications vary with touch IC, configuration, and screen size. The information above represents typical values.
Resources
(5)
-
Additional Support Resources
Download Drivers
-
Collateral
-
Compliance
Agency Approval Certificates
-
Drawings
Dimensional Drawing